Gee Dee Models Nottingham
Advanced Search
Model Shop Nottingham
You have 0 Item(s) in your shopping basket. Total: £0.00


HPI RACING Trophy Buggy Flux. 1/8th 4WD Brushless - 2.4GHz (107016)

Our Price: 390.00


1/8 scale  Ready To Run car imported by HPI Racing UK.  

AGE RECOMMENDATION: For ages 14 years and up. Not intended for use by children without direct adult supervision. This is not a toy.


 Fantastically Fast Brushless Buggy Fun! Ready built with 2.4G RC installed. REQUIRES  Two 2S LiPo batteries and charger

 The brushless-powered RTR Trophy Buggy Flux from HPI is the go-to kit for all-out fun and excitement combined with mind-bending top speeds! The Trophy Buggy has been a hugely popular 1/8th buggy, and now that it's fitted with the demonically fast Scream brushless motor and the 4S-capable Flux Rage speed controller, you can finally see what all the excitement is about with 1/8th electric buggies at a great price!

 Fully assembled right out of the box and fitted with a no-hassle HPI 2.4GHz radio system, the Trophy Buggy Flux is ready for you to drop in two 2S LiPo batteries for 14.8 volts of ground-crushing fun! Go brushless with the Trophy Buggy Flux!

2.4GHz RADIO SYSTEM - Ready-built right out of the box and fitted with an all-new 2.4GHz radio system, the Trophy Buggy Flux is the perfect introduction to serious 1/8th off-road buggies!

FLUX BRUSHLESS SYSTEM - The Flux Scream motor is the perfect match for the Trophy Flux with 1965KV of power, it was designed to give you the explosion of power you want from any car or truck!

The Flux Rage ESC is able to handle twin 2S batteries for up to 14.8 volts of power

CHASSIS LAYOUT - The chassis of the Trophy Buggy Flux is based on the nitro version of the Trophy Buggy, so its ready for anything you can throw at it.

SUSPENSION & STEERING - The Trophy Buggy Flux suspension was designed from the ground up to be tough, reliable and adjustable. The suspension is fully adjustable and equipped with turnbuckles, multiple shock mount and camber link locations, sway bars and more.

PERFORMANCE STRAIGHT FROM THE BOX - HPI makes it as easy as possible to get into RC Off-Road action. The Trophy Buggy Flux is completely pre-built, just add your choice of battery and charger and you are ready to go!


  • Length: 500mm
  • Width: 305mm
  • Height: 179mm
  • Wheelbase: 320mm (adjustable)
  • Track Width Front/Rear: 260mm
  • Tyres: 40mm wide x 110mm (outer diameter), 80mm inner diameter
  • Drivetrain: Full-Time Shaft 4WD


-Factory assembled and Ready-To-Run
-Pre-painted buggy body shell
-2.4GHz steerwheel RC system
-High torque steering servo
-Flux Scream 1965kv brushless motor & Flux Rage ESC
-4mm 6061 aluminium chassis has angled sides for extra stiffness
-Heavy-duty aluminium motor mount
-Enclosed radio box protects receiver from the elements
-Adjustable battery holders and hook & loop straps fits two hard-case 2S LiPo batteries
-Thick 6061 aluminium shock towers
-Cast aluminium steering knuckles
-Extra-long coil over, oil filled shocks
-Strong steel turnbuckles
-Thick rear sway bar
-Geared differentials
-17mm hex hubs
-7-spoke black chrome Edge wheels
-HB racing tyres

Needed To Complete:

  • Two 2S LiPo batteries with T-Style (Deans type) connector
  • Compatible Battery Charger 






HPI RACING Trophy Buggy Flux. 1/8th 4WD Brushless - 2.4GHz (107016)